Wooden floors have always been popular it seems. That is because they are quite versatile and fit any sort of interior. More importantly, they come with undeniably good qualities, like being able to isolate well and just looking beautiful. 

Ideal Wood Flooring Guide

But while the wooden material is very durable, there are still some issues that come with it. Like any type of floor, it can experience damage and a variety of other issues that homeowners need to be aware of. Following is a guide on what sort of issues wooden floors typically encounter and what the potential causes of those are. 

Pet stains Pet Stains In Wood Floor

It is clear who the culprit of such an issue is. And why wooden floors can be stain-resistant, they are not invulnerable, especially because pet stains can sometimes soak through the finish and cause damage to the wooden fibres. And that is when only sanding helps because stains in the fibres cannot be removed otherwise. Homeowners must do their best to train their pets and stay on top of potential accidents. Cleaning a mess early is crucial for preserving wooden floors against pet stain damage. 

Regular wear and tear 

The finish is what helps wooden floors retain their durability and manage against everyday traffic. However, the finish wears off over time, leaving the wood underneath vulnerable to signs of wear and tear – scratches, dents and dings. It is a good idea to go easy on wooden floors, such as implementing a no-shoes inside policy, to protect the floors for longer. 

Sun fading 

A lot of wooden floors are photosensitive, which means they are very likely to be affected by sunlight. They can change their colour over time due to sunlight exposure day after day. One way to delay the process of hardwood floor fading is by having a good quality finish. It is also a good idea to install blinds and limit sun exposure, to reduce sun fading of the hardwood material. 

Peeling finish Wood Floor Peeling Finish

Some finishes last a long time before the first exhibit signs of wear. However, if the finish has been applied poorly or the product is sub-par, signs of wear will appear much sooner. If the finish starts peeling too soon after application, it is a clear sign that residue and stains were not properly removed beforehand. Any contaminants prevent the wood from holding the finish well, so it is important to have professionals that know what they are doing in this crucial step. 

Cupped edges 

Cupping is associated with water damage. Cupped boards have their edges raised higher than the centre area. This can also happen if the flooring is installed over a wet subfloor, or when the general humidity in the room is high. At times floors flatten out on their own as the moisture evaporates, but in other cases, some sanding might be required. 

Gaps in the boards 

Boards will separate a little over time, but if the gaps are too wide, then that is a major issue. The most likely cause is poor installation. Because wood is a natural material, it contracts during dry weather and expands in humid weather. This can cause hardwood floors to appear larger in some seasons. If the boards are not completely dry during installation, the gaps between them might get bigger. 

It is always important to be aware if there is an issue with hardwood floors because they are an investment meant to be preserved. It is also important to know what causes these issues and how they can be avoided, to ensure one doesn’t encounter them. 

© FK Floor Sanding 


Leave a Reply

Your email address will not be published. Required fields are marked *