There are no two about it: a hardwood floor is a solid option for anyone who wishes to have that rustic feel in their home. It is a beautiful addition to any room and a great investment for any home. However, it bears mention that wood is a porous material, which means that it is quite vulnerable to water damage. 

Whether it be a leaky pipe, or a window that has not been sealed properly, water can get to hardwood floors in a variety of ways and deal some damage. Buckling and cupping are quite possible forms of damage, once the wood starts absorbing the moisture. This doesn’t have to be the end of your hardwood floor, as long as you educate yourself on the matter and stay on top of the issue. The following

A Guide will give you some Pointers to Important Aspects of Water Damage to Hardwood Floors, which you Will do Well to Apply to your Home

What are the signs of water damage on hardwood floors? Water Damage On Hardwood Floors

Perhaps the most telling sign of water damage on a hardwood floor in your home is mould. As wood becomes damp, mould sets in. You will be able to see it on the surface of the boards. Mould has a negative effect on the wooden boards, softening their texture. The board could even buckle into some soft splinters under the strain. If you don’t treat the issue on time, the mould can even lead to warping of the boards. There will be notable swelling in the middle section of each board, or their edges can start cupping. Floorboards can lift or break away from each other as a result, leaving the room with unsightly gaps. 

How to address water damage? 

Here are some steps you should take if your hardwood floor has been damaged by water damage

Locate the source of water 

The first thing you should do is to locate where the water is coming from. You have to stop it or stem the flow first before you can address any damage it has done to the hardwood floor. The sooner you do it, the better your chances of getting away with the repair of the floor, rather than replacement. 

Clear the area Water Damage In Hardwood Floor

If there are any rugs or pet beds in the area, you will have to remove them. Any sort of furniture only adds to a load of moisture on the floorboards. Besides, soft furnishings tend to keep moisture for longer, exposing the wood underneath them as well. 

Dry the area 

Next up, you should mop up the moisture to the best of your ability. Some of the water seeped between the boards will be difficult to remove, so you might have to rely on a dehumidifier for the job. 

Inspect for warping and mould 

If it is recent damage, it won’t be an issue. But if the moisture has been going on for a few days, you might want to check the corners and joints for any signs of mould. 

Cupped and lifted boards can be remedied by drying up the area well and then sanding the lifted edges. You can also nail the wood down and even out the boards. When you apply varnish on top, it will be as new. 

Boards should be removed if they are too soft or too warped. Pry open the damaged boards and once you expose the damaged area, you should clear it and ensure that no more moisture remains. You should then place new boards, sand them and varnish them. 

© FK Floor Sanding


Leave a Reply

Your email address will not be published. Required fields are marked *